Pantera™ DP1500i is an intelligent, hydraulic, diesel-powered, self-propelled top hammer drill rig. Designed for large hole drilling, it is suited to production drilling in large quarries or open pit mines, construction work sites and wall control and development works.
discovery more
Related Products
Bring to the table win-win survival strategies to ensure proactive domination. At the end of the day, going forward,a new normal that has evolved from generation .
Related products
-
FILTER AND SPIN GRIDS
There are two main techniques:
- Welded technology
- Looped technology
GIRON offers both versions to suit your applications and problems. In both cases, the product flows over a totally smooth surface made possible by the succession of wires. The space between each profile creates a gap, known as an interstice, fissure or slot.
In the welded versionThe wire is manufactured by rolling from round wire. Rolling is the most common process, generating a profile with slightly rounded edges. These profiles are then welded to perpendicularly positioned cross-members.
In the curly versionThe trapezoidal wire was stamped from round wire. GIRON’s contoured fissure grids have been developed for over 50 years. Stamping produces protruding edges for high drainage efficiency. These profiles are then assembled on rounds. At GIRON, the steel round is 7 mm in diameter and the loops have a pitch of 70 mm.
This technique guarantees opening accuracy unsurpassed gap widths, especially for very fine cracks. Grids can be supplied flat or curved, bare or with all types of reinforcement such as flats, angles or other accessories.
-
TN77 CONVEYOR BELT METAL DETECTOR
The electronic TN77 Conveyor Belt Metal Detector is a tunnel-type unit that is generally installed onto conveyor systems. The TN77 enables a continuous inspection to be made of any non-metallic or non-conductive materials. The unit is used for the detection of tramp iron and manganese steels where their presence would prove damaging to processing equipment or a clients’ end product.
-
Sand And Gravel Processing Plant
When sand and gravel are quarried, there are often impurities such as loam, clay, wood or coal. For this reason, a combination of cleaning and separating processes are implemented at an early stage to gain precious raw materials.




Reviews
There are no reviews yet.