DL422iE – DCS

Sandvik DL422iE is a fully automated, battery-powered top hammer longhole drill, designed for underground mass mining in 4 x 3.5 meters (H x W) or larger production drifts. It reduces emissions while tramming, creating a healthier and safer working environment.

Add to Cart

Informacion shtesë
Përshtypje (0)

Informacion shtesë

Brand	Sandvik

Shqyrtime

Ende pa shqyrtime.

Bëhuni i pari që shqyrton “DL422iE”

Produkte të afërt

Lexoni më tepër
FILTER AND SPIN GRIDS
There are two main techniques:

Welded technology

Looped technology

GIRON offers both versions to suit your applications and problems. In both cases, the product flows over a totally smooth surface made possible by the succession of wires. The space between each profile creates a gap, known as an interstice, fissure or slot.

In the welded versionThe wire is manufactured by rolling from round wire. Rolling is the most common process, generating a profile with slightly rounded edges. These profiles are then welded to perpendicularly positioned cross-members.

In the curly versionThe trapezoidal wire was stamped from round wire. GIRON’s contoured fissure grids have been developed for over 50 years. Stamping produces protruding edges for high drainage efficiency. These profiles are then assembled on rounds. At GIRON, the steel round is 7 mm in diameter and the loops have a pitch of 70 mm.

This technique guarantees opening accuracy unsurpassed gap widths, especially for very fine cracks. Grids can be supplied flat or curved, bare or with all types of reinforcement such as flats, angles or other accessories.
Lexoni më tepër
Lexoni më tepër

TN77 CONVEYOR BELT METAL DETECTOR

The electronic TN77 Conveyor Belt Metal Detector is a tunnel-type unit that is generally installed onto conveyor systems. The TN77 enables a continuous inspection to be made of any non-metallic or non-conductive materials. The unit is used for the detection of tramp iron and manganese steels where their presence would prove damaging to processing equipment or a clients’ end product.

Lexoni më tepër
Lexoni më tepër

GRILGIRCO (A)

Wire Ø 0.5 to 3 mm

These cloths correspond to the most elementary forms of preforming, characterized by a sinusoidal corrugation to guarantee perfect cohesion at the crossing points as well as cut-off quality.

Lexoni më tepër